Crash Bars
- Quality 27mm/1.06″ steel tube with 2mm wall thickness.
- Torture tested – we don’t release crash bars that we don’t brutally test on our ADV bikes. Head to our YouTube channel to see the test.
- Less is often more. We didn’t try to cover the whole entire bike with crash bars that look like a cobweb. The Yamaha XT1200Z Super Ténéré models have very few tough mounting points, thus it makes more sense to create one solid and compact crash bar that stays close to the few mounting points. This will also result in less flexing and bending than necessary. Our compact and tough crash bars are the only way to go here to truly protect your Yamaha’s expensive and fragile parts.
- Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
Compatibility:
Crash bars: Compatible with 2010-2021 Super Tenere.
Skid Plate
- Protects crucial areas of the engine – oil pan, engine case, oil cooler, oil filter, water pump and exhaust header! That’s a long list of very expensive parts to expose to any sort of damage that will reduce your bikes value in no time.
- Uniquely designed vent system – Not only unique but very-well thought out. No unnecessary holes were designed on this bash plate. As a result, your engine will less likely to overheat when mud and all sorts of debris from off-roading fly at the engine and get stuck between the skid plate and the engine/exhaust header.
- 5mm thick laser cut aluminum – Nothing is ever an overkill on an adventure bike, hence we choose to build our bash plates from this ridiculously tough and thick, yet lightweight material.
- Tough mounting hardware – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts.
- Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
Compatibility:
Skid plate: Compatible with 2010-2021 Super Tenere. Outback Motortek crash bars must be installed in order to install the skid plate.
Leonard B. (verified owner) –
My order was filled and sent to the house in short order and the product was exactly as I expected it to be The fit and finished work perfectly and it was very easy to install especially after watching the videos.
Lorry (store manager) –
Thanks for your feedback and compliments!
Robert Gill (verified owner) –
I purchased the protection combo for my 2013 Yamaha Super Tenere after doing a lot of research and witnessing how this combo held up on a friend’s bike. I have ridden this bike in extremely difficult, technical terrain with some nasty crashes and it protected the bike like it is designed to do. You would not believe the abuse this setup has taken and remains intact (both the bike and the guards). It has the best construction and thickest bash plate of anything in the industry. With the price of these bikes you definitely don’t want to have to replace expensive pieces and this combo does the trick. I highly recommend this product.
willem e. (verified owner) –
Overall the quality of the skid plate and crash bars is very good. Very thick and sturdy metal used in the construction. Nice paint and welds. The hardware (screws) are soft metal so it was not easy to put torque on them.