Protection
Yamaha Tenere 700 – Center Stand
$240.00
Yamaha Tenere 700 – Crash Bars
$520.00
Select options
This product has multiple variants. The options may be chosen on the product page
Let's begin with the most important thing: our focus was to add as little weight as possible to the Tenere 700! In order to achieve this we utilized four, frame-only mounting points to spread the impact evenly, should there be a crash. Thanks to the four mounting points each side, we could utilize 22mm diameter tubing.
Click here to watch the crash bars torture test as we drag the motorcycle using another vehicle!
Important note: Confirmed to be compatible with the factory equipped Yamaha skid plate, SW-Motech, ACD Racing and Camel ADV. We'll update this note as soon as we learn of other compatible aftermarket skid plates.
Yamaha Tenere 700 – Skid Plate
$360.00
Select options
This product has multiple variants. The options may be chosen on the product page
Fully frame mounted, protects your engine and engine components, including a link cover* on the Euro 5 version (2022-2024). Our skid plate is designed to offer coverage with proper support for a long list of fragile and expensive parts on and around the Yamaha Tenere 700 engine. It's inevitable to equip your Tenere 700 with our skid plate if you plan to take it off-road.
Scroll down to learn more.
Yamaha Tenere 700 – Ultimate Protection Combo
$775.00 – $830.00
Select options
This product has multiple variants. The options may be chosen on the product page
The ultimate protection combo for Yamaha Tenere 700 features armour from top to bottom. The best part is that it’s the only manufacturer drop tested protection combo in the world!
In this package upper and lower crash bars are included as well as skid plate. Crash bars offer protection for the plastic fairing and the radiator. The skid plate features elements to create an armour for the exhaust header, oil filter, side stand sensor and the rear suspension linkage.
Read more about the features and benefits by scrolling further down.
Yamaha XT1200Z Super Tenere – Crash Bars
$390.00
Select options
This product has multiple variants. The options may be chosen on the product page
One of the biggest advantages of our crash bars system for Yamaha XT1200Z Super Tenere is the all around 27mm diameter tubing that rests on 5mm thick steel mounting tabs (three on each side!) and offers reliable protection for fairing, radiator and other parts of the engine.
Click here to watch the torture test.
The design is based on the philosophy that less is often more, hence we created a compact, sturdy set of crash bars that do not reach far away from its mounting points. This system perfectly complements the sporty, aggressive lines of the Yamaha XT1200Z Super Ténéré.
Yamaha XT1200Z Super Tenere – Protection Combo
$755.00
Select options
This product has multiple variants. The options may be chosen on the product page
We're introducing you our torture tested, full protection combo for Yamaha XT1200Z Super Tenere.
This combo package includes a set of sturdy crash bars, which features four mountings points on each side. Our skid plate is wider than the engine to offer full protection for the exposed clutch and stator covers as well as the exhaust headers.
Note: We recommend only the short oil filters (±60mm), versions 5GH1344060 and 5GH1344061.
Yamaha XT1200Z Super Tenere – Skid Plate
$390.00
Select options
This product has multiple variants. The options may be chosen on the product page
Outback Motortek offers protection for your Yamaha XT1200Z Super Tenere's engine and its components such as exhaust header, oil cooler, water pump which may be badly exposed during off-roading without our skid plate.
We built our skid plate to meet the most demanding conditions and to prove that our first and longest 2500km test ride took place in the rugged backcountry of NSW, Australia.
Note: We recommend only the short oil filters (±60mm), versions 5GH1344060 and 5GH1344061.
Triumph Tiger 800 – Crash Bars
$380.00
Select options
This product has multiple variants. The options may be chosen on the product page
Crash Bars and Engine Guards System for Triumph Tiger 800 XR, XC, XRx, XRx LOW, XRT, XCx or XCA
One of the biggest advantages of our crash bars system is the all around 25mm diameter tubing that rests on 5mm thick steel mounting tabs and offers reliable protection for fairing, radiator, engine case and other parts of the engine.
The design is based on the philosophy that less is often more, hence we created a compact, sturdy set of crash bars that do not reach far away from its mounting points. This system perfectly complements the sporty, aggressive lines of the Triumph Tiger 800.
Triumph Tiger 900 – Crash Bars
$430.00
Select options
This product has multiple variants. The options may be chosen on the product page
Crash Bars for Triumph Tiger 900 Rally, *900 Rally PRO, GT, GT Low and GT PRO.
Reliable protection for fairing, radiator, engine case and other parts of the engine.
Our crash bars' design is based on the philosophy that less is often more, hence we created a compact, sturdy set of crash bars that do not reach far away from its mounting points. This system perfectly complements the sporty, aggressive lines of the Triumph Tiger 900.
*Not compatible with the original Triumph crash bars.
IMPORTANT DISCLAIMER on this particular product.
Please read it before you order.
Suzuki DL 650 Vstrom – Bronze Level Combo
$480.00
Select options
This product has multiple variants. The options may be chosen on the product page
Crash Bars: provides sufficient protection for your outrageously expensive fairing components, turn signal, radiator etc. Without this protection you would be looking at thousands of dollars of new Suzuki parts and labour.
Skid Plate: Our "Langar II." skid plate is truly the ultimate and best armor in the market to protect your motorcycle's engine. Designed for heavy-duty off-roading, tested for month for proof and now serves Vstrom off-road and adventure riders.
Suzuki DL 650 Vstrom – Crash Bars
$240.00
Select options
This product has multiple variants. The options may be chosen on the product page
As you know, most dual sport riders install crash bars to prevent damage on a specific area of their precious motorcycles. In this case Suzuki DL 650 Vstrom. But did you know that well-designed crash bars also give your bike a macho-look? We focused on both features during the design and development process, thus the result is a MIG welded 27mm diameter tube of hand and machine crafted art.