Shop

Triumph Tiger 800 – Pannier Racks

(1)

In stock

Price range: $290.00 through $410.00

Pannier Racks for Triumph Tiger 800

The Adventure Moto/Outback Motortek X-Frames for the Triumph Tiger 800 are the most universal and functional side pannier frames yet, allowing simple, secure mounting of Rotopax, hard panniers and soft luggage.

New for 2019: We’re now offering standard pannier racks. The difference between our standard pannier racks and the X-Frames is that the standard frames don’t feature RotoPax mounts and tabs welded on all four corners.

Select options This product has multiple variants. The options may be chosen on the product page

Triumph Tiger 900 – Center Stand

In stock

$265.00

Centre Stand for your Triumph Tiger 900 can be a valuable addition when it comes to maintaining the chain, changing or repairing tires, washing your bike, parking in tight spaces and the list goes on.

Triumph Tiger 900 – Pannier Racks

(8)

In stock

Price range: $290.00 through $400.00

Pannier Racks for Triumph Tiger 900/850 Sport

X-Frame: the Triumph Tiger 900 are the most universal and functional side pannier frames yet, allowing simple, secure mounting of Rotopax, hard panniers and soft luggage.

Standard: The difference between our standard pannier racks and the X-Frames is that the standard frames don’t feature RotoPax mounts and tabs welded on all four corners. However, there’s the option to purchase Rotopax brackets separately here.

Total width of the pannier racks installed: 51cm

IMPORTANT DISCLAIMER on this particular product.
Please read it before you order.

Select options This product has multiple variants. The options may be chosen on the product page

Triumph Tiger 900 – Rear Luggage Rack

(1)

In stock

$180.00

Outback Motortek designed a rear luggage rack for the Triumph Tiger 900 and 850 Sport that is very functional. We’ve added holes that are large enough for technically any tie down straps or bungee cord to help you secure a bag, tent etc. on it.

The bonus is the laser cut holes that allow you to directly mount RotoPax fuel or water cans without any modification.

Select options This product has multiple variants. The options may be chosen on the product page

X–Bracket for Pannier Racks

(5)

In stock

$40.00

X-Bracket platform for Outback Motortek Standard Pannier racks

Built from a strong sheet of aluminium, the X-Bracket is a mounting platform for our Standard Pannier racks. It is designed to be used as a base in order to mount a variety of accessories, including but not restricted to, a 1 gallon ‘Rotopax’ (or similar) fuel/water canister, our Tool Box, a First Aid kit, etc.*

The sliding X-Bracket can be mounted in the centre of the pannier racks or close to either edge, allowing the mounting of accessories on the outside as well. Shifted all the way forward or backward, it’ll make room for strapping a smaller 6-10L bag next to it.

*Fuel canister and other mentioned accessories are not included in the purchase.

Select options This product has multiple variants. The options may be chosen on the product page

Yamaha Tenere 700 – Center Stand

In stock

$265.00

Center Stand for your Yamaha Tenere 700 (all models) can be a valuable addition when it comes to maintaining the chain, changing or repairing tires, washing your bike, parking in tight spaces and the list goes on.

Yamaha Tenere 700 – Crash Bars

(10)

In stock

$590.00

Let’s begin with the most important thing: our focus was to add as little weight as possible to the Tenere 700! In order to achieve this we utilized four, frame-only mounting points to spread the impact evenly, should there be a crash. Thanks to the four mounting points each side, we could utilize 22mm diameter tubing.

Click here to watch the crash bars torture test as we drag the motorcycle using another vehicle!

Important note: Confirmed to be compatible with the factory equipped Yamaha skid plate, SW-MotechACD Racing and Camel ADV. We’ll update this note as soon as we learn of other compatible aftermarket skid plates.

Select options This product has multiple variants. The options may be chosen on the product page

Yamaha Tenere 700 – Crash Bars Combo (v2)

In stock

Original price was: $670.00.Current price is: $629.80.

A refreshed look and feel of one of our most popular products, designed to better suit the most recent Tenere 700 model(s).

Our Crash Bars Combo (Lower + Upper) is here to fully protect your T7, shall you wish to test its limits, offering protection to the engine, side fairings and the whole front section of the bike.

Yamaha Tenere 700 – Headlight Guard

In stock

$120.00

Headlight guards, designed for the Yamaha Tenere 700 2019-2024, made to protect your expensive headlight module from being damaged by rocks and debris during your off-road riding sessions.*

*For off-road use only.

Yamaha Tenere 700 – Lower Crash Bars (V2)

In stock

$380.00

A refreshed look and feel of one of our most popular products, designed to better suit the most recent Tenere 700 model(s).

Each rider and ride have different needs: Focusing on versatility and keeping the weight as little as possible, we’ve designed a new set of crash bars that can be ordered and installed together – or separately. Our Lower Crash Bars can be ordered on their own for immediate protection and low additional weight.

Select options This product has multiple variants. The options may be chosen on the product page

Yamaha Tenere 700 – Pannier Racks

(10)

In stock

Price range: $290.00 through $400.00

Yamaha Tenere 700 Pannier Racks
Compatible with our Rear Rack Combo.

We offer both Standard and X-Frame pannier racks. The X-Frame for the Yamaha Tenere 700 are the most universal and functional side pannier frames yet. The sliding ‘X’ plate design allows a 1 gallon fuel canister (watch video) or our tool box to be installed on the inner side. The X-shaped plates included with the X-Frame pannier racks are black by default.

Total width of the symmetrical pannier racks: 61cm.

– We offer asymmetrical (narrower profile) pannier racks.
Total width of the asymmetrical pannier racks: 55cm

– We offer an asymmetrical high exhaust version, confirmed to be compatible with:

  • HP Corse SP1
  • MIVV Dakar
  • Huzar
  • Dominator GPF Hi Level 
  • We’ll add to this list as we learn about compatibility with other brands.

Total width of the high exhaust version (slightly asymmetrical): 50cm

Select options This product has multiple variants. The options may be chosen on the product page

Yamaha Tenere 700 – Rackless Luggage Support

In stock

$215.00

A simple and lightweight side luggage support, designed to hold your soft luggage and keep it from bouncing while riding. It helps avoiding possible contact between your bags and the rear wheel or the exhaust.

Keep your luggage in place, and your ride safer and more enjoyable, while riding both on and particularly off-road.

Select options This product has multiple variants. The options may be chosen on the product page