Back to products
Honda CRF1000L Africa Twin – Pannier Racks
$265.00 – $370.00
KTM 1090 / 1190 / 1290 Adventure R / S – Upper Crash Bars
$330.00
One of our upper crash bars’ biggest advantage is the non-floating design. To achieve this, we’ve developed a heavy-duty bracket to support the upper section of the crash bars, thus the structure is reinforced to avoid flexing and collapsing during impact of a crash. Furthermore, we reduced the additional weight by using the same 22mm diameter tubing as the KTM factory crash bars, as opposed to other manufacturers who use 25 or even 27mm diameter tubing without proper support, such as the Outback Motortek signature bracket system.
Please note: your KTM 1090 / 1190 / 1290 Adventure R / S – Upper Crash Bars must be equipped with factory KTM lower crash bars to complete the fitment of our upper crash bars.
Ships from Cotati, CA, USA
KTM 1090/1190/1290 Adventure: Compatibility check
Multiple KTM 1090/1190/1290 Adventure Names: Check here
Check the Auxiliary Light Brackets as valuable assets for your crash bars.
Description
Features
- Hand MIG welded – It’s all about the strength! We continue to follow our philosophy: toughness and functionality over appearance. Although our welders make those welds look like art.
- 22mm steel tube with 2mm wall thickness – Matches the specs of the specs of the factory KTM crash bars
- Less is often more – One of our goals was to preserve the low center of gravity feature of the KTM 1090 / 1190 / 1290 Adventure R / S – Upper Crash Bars by using the same tubing diameter as the KTM factory crash bars. Many other manufacturers use 25mm and even 27mm tubing to protect the upper part of your KTM but it adds up to 1-1.5kg extra, thus making it top heavier while not guaranteeing better impact absorption.
- Tough mounting points – No cutting corners here (either)! Precision laser cut pieces for perfect fitment using 5mm thick metal mounts. These parts absorb a lot of impacts from crashes, rather than your bikes chassis that”s worth thousands of dollars/Euros.
- Powder coated – combined with sandblasting it’s a killer combination to protect your product’s surface. No frills and tough just like your ADV/Dual Sport bike!
Compatibility:
KTM 1090R/1290R: 2017-2020 | Can also be mounted on the S models, if equipped with the OEM lower crash bars.
KTM 1190 Adventure: 2015-2016 models only. Earlier 1190 models have their original KTM crash bars located about 25mm/1” lower and those are not compatible with our upper crash bars.
Additional information
| Weight | 9 lbs |
|---|---|
| Dimensions | 24 × 15 × 8 in |
| Brand |
Outback Motortek |
| Color |
Black ,Orange |
| Condition |
New |
| Material |
Mild Steel |
| Year |
2015 – 2020 |
Video Installation
17 reviews for KTM 1090 / 1190 / 1290 Adventure R / S – Upper Crash Bars
| 5 star | 88% | |
| 4 star | 5% | |
| 3 star | 5% | |
| 2 star | 0% | |
| 1 star | 0% |
Only logged in customers who have purchased this product may leave a review.
You may also like…
KTM 1090 / 1190 / 1290 Adventure R – Protection Combo
$630.00
Select options
This product has multiple variants. The options may be chosen on the product page
One of our upper crash bars’ biggest advantage is the non-floating design. To achieve this, we’ve developed a heavy-duty bracket to support the upper section of the crash bars, thus the structure is reinforced to avoid flexing and collapsing during impact of a crash.
Outback Motortek offers protection for your KTM Adventure’s engine and its components such as exhaust header, oil cooler which may be badly exposed during off-roading without our skid plates.
Please note: your KTM 1090 / 1190 / 1290 Adventure R must be equipped with factory KTM lower crash bars to complete the fitment of our upper crash bars.
Tool Box
$160.00 – $195.00
Select options
This product has multiple variants. The options may be chosen on the product page
Outback Motortek Tool Box
A universal matte black textured, lockable tool box. Designed to fit and keep all your tools in one place, strategically mounted on the (exhaust opposite side) inner part of our pannier racks. You can also mount it on the outer side or even on our rear luggage rack, if you prefer to do so, according to your own needs and luggage setup.
The Tool Box is compatible with ALL Outback Motortek pannier racks and comes ready to be installed.*
*If you have our Standard Pannier racks, you'll need an 'X-Bracket' mounting platform. Choose 'Yes' on the 'X-Bracket' option below, or get it here.
X–Bracket for Pannier Racks
$35.00
Select options
This product has multiple variants. The options may be chosen on the product page
X-Bracket platform for Outback Motortek Standard Pannier racks
Built from a strong sheet of aluminium, the X-Bracket is a mounting platform for our Standard Pannier racks. It is designed to be used as a base in order to mount a variety of accessories, including but not restricted to, a 1 gallon ‘Rotopax’ (or similar) fuel/water canister, our Tool Box, a First Aid kit, etc.*
The sliding X-Bracket can be mounted in the centre of the pannier racks or close to either edge, allowing the mounting of accessories on the outside as well. Shifted all the way forward or backward, it'll make room for strapping a smaller 6-10L bag next to it.
*Fuel canister and other mentioned accessories are not included in the purchase.
Anonymous (verified owner) –
Jason D. (verified owner) –
Good product and shipping. One flaw in the directions about what size bolt goes where. Easy enough to tell which bolts needed to be swapped. No danger to my bike so far and the bars have been used.
admin (store manager) –
Thank you for your feedback. We will certainly adjust this in our installation manual.
Scott M. (verified owner) –
Fantastic crash bars, well made and light weight!!
admin (store manager) –
Thank you, Scott. Glad to hear of your positive experience!
Jason Warwick (verified owner) –
I bought the bars after seeing a review online. I like the protection that they offer and I think the design is the best out there. 5 stars for protection and design. That being said the bars shipped with 2 bolts too short( the review I saw online also noted this so I was prepared). The power coat is my main complaint. The color is off and where the logos where placed the power coat is damaged. I plan on getting them redone in the correct color after this riding season( I’m going to drop the bike a few times, I’m sure). I also could not contact the customer service department of Outback Moto so that was a little disappointing. That been said these bars are what I was looking in the end.
admin (store manager) –
Thank you for your review, Jason. We’ve sent you an email to offer compensation and replacement parts.
Patrick C. (verified owner) –
Missing two bolts in hardware kit but amazing product, best design on the market
admin (store manager) –
Thank you, Patrick.
Robert Musheno (verified owner) –
These crash bars are fantastic! The fitment is perfect. Although they are snug against the bike ( another plus ) you can still easily remove the plastics to service the air filters without having to take off the bars. I have the TripleClampMoto support brackets for the light and display housing and these fit perfectly with them. Great product!
Mark (store manager) –
Thank you for your feedback, Robert. Great to know that the Triple Clamp Moto brackets are compatible as well!
Rick Newsom (verified owner) –
Great product very very happy with it for my KTM 1090
ANDRES BRONZOVIC –
Estimado MARC. En primer lugar muchas gracias por tu atencion.
Después de la compra enseguida despacharon el producto a mi casilla en USA.
Vivo en USHUAIA PATAGONIA ARGENTINA.
Por esa razón el correo me lo envío en mayo.
Estoy emocionado por lo bien que se ven estas defensas.
Si tienes las herramientas es fácil instalar estas defensas. Encajan perfectamente en la 1090r.
Realmente se ven robustas.
Espero no caerme.
Aunque por estos caminos eso es casi seguro.
Y realmente me sentiré protegido con estas defensas.
Gracias MARC gracias OUTBACKMOTOREK.
Realmente han logrado un producto impresionante.
SALUDOS DESDE USHUAIA.
Dear MARC. First of all, thank you very much for your attention.
After the purchase they immediately shipped the product to my box in the USA.
I live in USHUAIA PATAGONIA ARGENTINA.
For that reason the mail sent it to me in May.
I’m excited for how good these defenses look.
If you have the tools it is easy to install these defenses. They fit perfectly in the 1090r.
They really look robust.
I hope I do not fall.
Although on these roads that is almost certain.
And I will really feel protected with these defenses.
Thank you MARC thanks OUTBACKMOTOREK.
They have really achieved an impressive product.
GREETINGS FROM USHUAIA.
Mark (store manager) –
Thank you Andres, so happy you received the product and love it! Sorry for the late response!
Richard Pfand (verified owner) –
Fantastic Product. Perfectly fit my 2018 KTM 1090 Adventure R. Instructions and installation are clear and easy.
Jeffrey Conley (verified owner) –
Easy install. Strangely enough I haven’t dropped the bike since I got them so 2k miles and still looking good.
Jon (verified owner) –
Great durability, personality tested on another bike
Brian Lynch (verified owner) –
Fit and finish is great. I have put the crashbars through a great deal of abuse this riding season and I’m happy to say these are solid! At least 7 hard crashes on single track chasing kids on 450’s.
Frank Fash (verified owner) –
Nice fit good quality
Ross L. (verified owner) –
Excellent construction and solid mounting. I’ve “field tested” these and I’m very pleased with them.
The installation of the cross piece to the OEM lower is difficult but take your time and try sticking the nyloc nuts to duct tape to keep them in position.
Garrett (verified owner) –
Work great have saved my plastics several times
Richard wharton (verified owner) –
Very solid. For the most part very simple install. But OMG provide please provide longer bolts for the front cross bar (in front of radiator). I gave up and bought two longer ones from hardware store. I don’t know if I got the wrong m6 bolts or what.
Robert W. (verified owner) –
I really like the fit and finish of these upper crash bars. It was a little tricky to install the bracket under the steering stabilizer, but well worth the effort. These bars work perfectly with the OEM lower bars.