Shop
Triumph Tiger 900 – Center Stand
$240.00
Triumph Tiger 900 – Pannier Racks
$255.00 – $355.00
Select options
This product has multiple variants. The options may be chosen on the product page
Pannier Racks for Triumph Tiger 900/850 Sport
X-Frame: the Triumph Tiger 900 are the most universal and functional side pannier frames yet, allowing simple, secure mounting of Rotopax, hard panniers and soft luggage.
Standard: The difference between our standard pannier racks and the X-Frames is that the standard frames don't feature RotoPax mounts and tabs welded on all four corners. However, there's the option to purchase Rotopax brackets separately here.
Total width of the pannier racks installed: 51cm
IMPORTANT DISCLAIMER on this particular product.
Please read it before you order.
Triumph Tiger 900 – Rear Luggage Rack
$160.00
Select options
This product has multiple variants. The options may be chosen on the product page
Outback Motortek designed a rear luggage rack for the Triumph Tiger 900 and 850 Sport that is very functional. We’ve added holes that are large enough for technically any tie down straps or bungee cord to help you secure a bag, tent etc. on it.
The bonus is the laser cut holes that allow you to directly mount RotoPax fuel or water cans without any modification.
X–Bracket for Pannier Racks
$35.00
Select options
This product has multiple variants. The options may be chosen on the product page
X-Bracket platform for Outback Motortek Standard Pannier racks
Built from a strong sheet of aluminium, the X-Bracket is a mounting platform for our Standard Pannier racks. It is designed to be used as a base in order to mount a variety of accessories, including but not restricted to, a 1 gallon ‘Rotopax’ (or similar) fuel/water canister, our Tool Box, a First Aid kit, etc.*
The sliding X-Bracket can be mounted in the centre of the pannier racks or close to either edge, allowing the mounting of accessories on the outside as well. Shifted all the way forward or backward, it'll make room for strapping a smaller 6-10L bag next to it.
*Fuel canister and other mentioned accessories are not included in the purchase.
Yamaha Tenere 700 – Center Stand
$240.00
Yamaha Tenere 700 – Rackless Luggage Support
$190.00
Select options
This product has multiple variants. The options may be chosen on the product page
A simple and lightweight side luggage support, designed to hold your soft luggage and keep it from bouncing while riding. It helps avoiding possible contact between your bags and the rear wheel or the exhaust.
Keep your luggage in place, and your ride safer and more enjoyable, while riding both on and particularly off-road.
Yamaha Tenere 700 – Crash Bars
$520.00
Select options
This product has multiple variants. The options may be chosen on the product page
Let's begin with the most important thing: our focus was to add as little weight as possible to the Tenere 700! In order to achieve this we utilized four, frame-only mounting points to spread the impact evenly, should there be a crash. Thanks to the four mounting points each side, we could utilize 22mm diameter tubing.
Click here to watch the crash bars torture test as we drag the motorcycle using another vehicle!
Important note: Confirmed to be compatible with the factory equipped Yamaha skid plate, SW-Motech, ACD Racing and Camel ADV. We'll update this note as soon as we learn of other compatible aftermarket skid plates.
Yamaha Tenere 700 – Pannier Racks
$255.00 – $355.00
Select options
This product has multiple variants. The options may be chosen on the product page
Yamaha Tenere 700 Pannier Racks
Compatible with our Rear Rack Combo.
We offer both Standard and X-Frame pannier racks. The X-Frame for the Yamaha Tenere 700 are the most universal and functional side pannier frames yet. The sliding 'X' plate design allows a 1 gallon fuel canister (watch video) or our tool box to be installed on the inner side. The X-shaped plates included with the X-Frame pannier racks are black by default.
Total width of the symmetrical pannier racks: 61cm.
– We offer asymmetrical (narrower profile) pannier racks.
Total width of the asymmetrical pannier racks: 55cm
– We offer an asymmetrical high exhaust version, confirmed to be compatible with:
- HP Corse SP1
- MIVV Dakar
- Huzar
- We'll add to this list as we learn about compatibility with other brands.
- Camel ADV High Exhaust will only work with the 'Default Exhaust' option
Yamaha Tenere 700 – Rear Rack Combo
$330.00
Select options
This product has multiple variants. The options may be chosen on the product page
Rear rack and passenger grab handle combo. Compatible with our X-Frame and standard pannier racks.
Yamaha Tenere 700 – Skid Plate
$360.00
Select options
This product has multiple variants. The options may be chosen on the product page
Fully frame mounted, protects your engine and engine components, including a link cover* on the Euro 5 version (2022-2024). Our skid plate is designed to offer coverage with proper support for a long list of fragile and expensive parts on and around the Yamaha Tenere 700 engine. It's inevitable to equip your Tenere 700 with our skid plate if you plan to take it off-road.
Scroll down to learn more.
Yamaha Tenere 700 – Ultimate Protection Combo
$775.00 – $830.00
Select options
This product has multiple variants. The options may be chosen on the product page
The ultimate protection combo for Yamaha Tenere 700 features armour from top to bottom. The best part is that it’s the only manufacturer drop tested protection combo in the world!
In this package upper and lower crash bars are included as well as skid plate. Crash bars offer protection for the plastic fairing and the radiator. The skid plate features elements to create an armour for the exhaust header, oil filter, side stand sensor and the rear suspension linkage.
Read more about the features and benefits by scrolling further down.