Shop
Showing 73–108 of 199 results
Honda XL750 Transalp – Skid Plate
Rated 0 out of 5
$370.00
Fully frame mounted! This helps any potential damage caused to the engine by transferring energy from potential impacts while off-roading. Scroll down to see more benefits and features of our XL750 Transalp skid plate.
Note: the Outback Motortek crash bars must be installed in order to mount our Transalp skid plate. It is not compatible with any other crash bars brands.
Total product weight: 8.6 lbs
Honda XL750 Transalp – Pannier Racks
Rated 0 out of 5
$255.00 – $355.00
Honda XL750 Transalp Pannier Racks by Outback Motortek.
Both Outback Motortek Standard and X-Frame pannier racks for the Honda Transalp are the most universal and functional side pannier frames yet. The X-Frame sliding “X” plate design offers a simple and secure extra mounting for a fuel canister, Tool Box and other accessories, along with your hard and/or soft luggage.
Total width of the pannier racks: (TBA)
Honda XL750 Transalp – Protection Combo
Rated 5.00 out of 5
$665.00
Ultimate Protection Combo For Honda XL750 Transalp
A protection combo consisting of Crash Bars and Skid Plate.
When designing these protective accessories, we had a different approach from other manufacturers. Keeping the high impact zone close to the toughest mounting points was our main goal and the result is a compact, extremely sturdy set of crash bars.
Weight: 20.7 lbs
Honda XL750 Transalp – Rear Rack
Rated 5.00 out of 5
$160.00
Outback Motortek designed a rear luggage rack for the Honda XL750 Transalp that is very functional. We’ve added holes that are large enough for technically any tie down straps or bungee cord to help you secure a bag, tent etc. on it.
The bonus is the laser cut holes that allow you to directly mount RotoPax fuel or water cans without any modification.
Husqvarna 701 Enduro – Crash Bars
Rated 5.00 out of 5
$255.00
The design of crash bars for Husqvarna 701 Enduro is based on the philosophy that less is often more, hence we created a compact, sturdy set of crash bars that do not reach far away from its mounting points. Our crash bars are only frame mounted.
Fully compatible with Perun Moto Rear Rack. -> Instructions here.
Husqvarna 701 Enduro – Pannier Racks
Rated 5.00 out of 5
$265.00 – $345.00
The Outback Motortek X-Frames for the Husqvarna 701 Enduro are the most universal and functional side pannier frames yet, allowing simple, secure mounting of Rotopax, hard panniers and soft luggage.
Standard pannier racks: The difference between our standard pannier racks and the X-Frames is that the standard frames don’t feature RotoPax mounts and tabs welded on all four corners.
Husqvarna 701 Enduro – Skid Plate
Rated 5.00 out of 5
$290.00
Husqvarna 701 Enduro is a great off-road dual sport motorcycle. So much so, that we chose to test our 701 Enduro accessories, including this skid plate on some really gnarly sections of the Spanish and Italian Trans Euro Trail.
Husqvarna FE 450 / FE 501 – Crash Bars
Rated 0 out of 5
$355.00
Fully frame mounted armour for your Husqvarna FE 450 and FE 501, to minimise or to prevent damage to the plastic panels and radiator.*
*Radiator guards are included with the crash bars.
Also available in Matte Black (and orange!) on this page.
Husqvarna Norden 901 – Ultimate Protection Combo
Rated 0 out of 5
$680.00
The ultimate protection combo for the Husqvarna Norden 901 features a 3-piece armour for your bike. The only drop and drag tested protection combo in the world!
In this package, you get both upper and lower crash bars as well as a skid plate. Crash bars offer protection for the plastic fairing, the radiator and the lower tank guards. The skid plate protects the bottom of your engine and bike, and it's fully frame mounted.
Read more about the features and benefits by scrolling further down.
Husqvarna Norden 901 – Center Stand
Rated 0 out of 5
$220.00
Our centre stand will be a valuable addition to your Husqvarna Norden 901 when it comes to maintaining the chain, changing or repairing tires, washing your bike, parking in tight spaces and the list goes on.
It's been tested and confirmed to be compatible with the OEM KTM skid plate and Outback Motortek Husqvarna Norden 901 skid plate.
Husqvarna Norden 901 – Pannier Racks
Rated 0 out of 5
$240.00 – $335.00
The Outback Motortek X-Frames for the Husqvarna Norden 901 are the most universal and functional side pannier frames yet, allowing simple, secure mounting of Rotopax, hard panniers and soft luggage.
The X-Frame sliding “X” plate design allows our tool box here to be installed on the inside both with the X-Frame version and standard pannier racks. For standard pannier racks, 1x “X” bracket must be purchased separately in order to install our tool box.
Husqvarna Norden 901 – Rear Luggage Rack
Rated 0 out of 5
$160.00
Outback Motortek designed a Rear Luggage Rack for Norden 901 that isn’t only gorgeous looking, but is very functional as well. We’ve added holes that are large enough for technically any tie down straps or bungee cord to help you secure a bag, tent etc. on it.
The bonus is the laser cut holes that allow you to directly mount RotoPax fuel or water cans without any modification. Read some specs and features of this product below.
Kawasaki KLR650 – Crash Bars
Rated 5.00 out of 5
$295.00
Crash Bars for the Kawasaki KLR650 (2022+ | all models)
Reliable protection for fairing, radiator, engine case and other parts of the engine.
Our crash bars’ design is based on the philosophy that less is often more, hence we created a compact, sturdy set of crash bars that do not reach far away from its mounting points. This system perfectly complements the rugged, strong lines of the KLR650.
Kawasaki KLR650 – Pannier Racks
Rated 0 out of 5
$275.00 – $345.00
Kawasaki KLR650 (2022+ | all models)
X-Frame: the most universal and functional side pannier frames yet, allowing simple, secure mounting of Rotopax, hard panniers and soft luggage.
Standard: The difference between our standard pannier racks and the X-Frames is that the standard frames don’t feature RotoPax mounts and tabs welded on all four corners. However, there’s the option to purchase Rotopax brackets separately here.
Total width of the pannier racks installed: 51cm
Kawasaki KLR650 – Protection Combo
Rated 0 out of 5
$570.00
Protection Combo for the Kawasaki KLR650 (2022+ | all models)
Our Crash Bars offer reliable protection for fairing, radiator, engine case and other parts of the engine. The design is based on the philosophy that less is often more, hence we created a compact, sturdy set of crash bars that do not reach far away from its mounting points. This system perfectly complements the rugged, strong lines of the new KLR650.
The Skid Plate offers protection for your KLR's engine and its components such as the oil pan, exhaust header and oil cooler, which may be badly exposed during off-roading without our skid plate. Protect your bike by investing in our engine protection.
Kawasaki KLR650 – Skid Plate
Rated 0 out of 5
$310.00
Skid Plate for the Kawasaki KLR650 (2022+ | all models)
Outback Motortek offers protection for your KLR650 engine and its components such as the oil pan, exhaust header, oil cooler which may be badly exposed during off-roading without our skid plate. Protect your bike by investing into our engine protection.
Kawasaki KLX300 – Pannier Racks
Rated 0 out of 5
$0.00
Pannier Racks for the Kawasaki KLX300 (2024+ | all models)
The Outback Motortek X-Frame racks for the KLX300 are the most universal and functional side pannier frames yet, allowing simple, secure mounting of hard panniers and soft luggage as well as some accessories like a tool box or a small fuel canister.
We also offer Standard pannier racks. The difference between our standard pannier racks and the X-Frames is that the standard frames don’t feature the X-Bracket mounts and tabs welded on all four corners.
Kawasaki KLX300 – Rear Luggage Rack
Rated 0 out of 5
$0.00
Rear Luggage Rack for the Kawasaki KLX300 (2024+ | all models)
We've designed a highly functional rear rack for the KLX300. Edge holes that are large enough for technically any tie down strap or bungee cord, to help you secure a bag, tent, etc. on it.
We've also laser cut some extra holes on top that allow you to directly mount a fuel or water canister without any modification. Read some specs and features of this product below.
KTM 1090 / 1190 / 1290 Adventure R – Protection Combo
Rated 4.50 out of 5
$630.00
One of our upper crash bars’ biggest advantage is the non-floating design. To achieve this, we’ve developed a heavy-duty bracket to support the upper section of the crash bars, thus the structure is reinforced to avoid flexing and collapsing during impact of a crash.
Outback Motortek offers protection for your KTM Adventure’s engine and its components such as exhaust header, oil cooler which may be badly exposed during off-roading without our skid plates.
Please note: your KTM 1090 / 1190 / 1290 Adventure R must be equipped with factory KTM lower crash bars to complete the fitment of our upper crash bars.
KTM 1290 Super Adventure – Crash Bars Combo
Rated 0 out of 5
$665.00
Our 10th officially drop and drag tested crash bars combo! The combo consists of a set of lower and upper crash bars and it offers protection for plastic panels, fuel tank and the radiator, in some of the most common drop scenarios. See the video yourself via this link.
KTM 1290 Super Adventure – Lower Crash Bars
Rated 0 out of 5
$395.00
Our lower crash bars for KTM 1290 Super Adventure R / S offer better performance (test based) vs. the original KTM lower crash bars, thanks to the improved design, including the connection and mounting points.
The Outback Motortek upper crash bars are ONLY compatible with the Outback Motortek lower crash bars.
KTM 1290 Super Adventure – Skid Plate
Rated 0 out of 5
$390.00 – $400.00
Outback Motortek offers protection for your KTM 1290 Super Adventure R / S engine and its components such as exhaust header, oil cooler which may be badly exposed during off-roading without our skid plates. Protect your investment by investing into our engine protection.
The Outback Motortek skid plate is also compatible with the OEM lower crash bars. If requested, an additional mounting bracket will be supplied as part of the skid plate hardware package.
Load more products
Loading...